Skip to searchSkip to main content
Calibrations & Controls

Photo Gallery

Installed and Logging Daily Totals

Installed and Logging Daily Totals

A newly installed daily flow totalizing device, capturing and storing precise daily flow values for regulatory reporting and operational insights. Designed for simplicity and reliability in remote or unmanned systems.

Compact Design Big Impact

Compact Design Big Impact

This compact totalizer is mounted directly to the flow meter, offering operators a simple solution for recording daily flow history—no SCADA system required.

Daily Flow Visibility at Your Fingertips

Daily Flow Visibility at Your Fingertips

Operators can now access past flow data with ease. This device stores multiple days of totals, helping fill data gaps caused by missed reads, weekends, or staffing limitations.

Smart Data Capture for Compliance

Smart Data Capture for Compliance

Ideal for facilities required to maintain daily flow logs, this device ensures accurate, time-stamped totals are available when needed—supporting compliance and operational efficiency.

Emergency Response to Water Tower Failure

Emergency Response to Water Tower Failure

Captured during a rapid-response callout, our technician inspects the failed pressure transducer responsible for monitoring critical tank levels.

Restoring Visibility to Tank Operations

Restoring Visibility to Tank Operations

Onsite calibration in progress after isolating a faulty pressure sensor.

Troubleshooting Under Pressure

Troubleshooting Under Pressure

Diagnostic checks underway at the base of a municipal water tower.

Failure Found System Saved

Failure Found System Saved

After identifying a signal dropout in the tank-level pressure sensor, we calibrated and validated a replacement, ensuring reliable water supply management resumed without delay.

Out With the Old In With the Accurate

Out With the Old In With the Accurate

The original flow meter at Lake Lillian reached the end of its life. We removed the failed unit and installed a brand-new sensor and transmitter to restore reliable flow tracking.

Precision Back in the Pipeline

Precision Back in the Pipeline

A new flow sensor installed and aligned for optimal accuracy. Lake Lillian's team can now rely on consistent flow data after weeks of unreliable readings from the old unit.

Sensor and Transmitter Installed System Restored

Sensor and Transmitter Installed System Restored

We replaced both the sensor and transmitter on this line, bringing the flow monitoring system at Lake Lillian back online with full functionality.

Flow Restored Downtime Eliminated

Flow Restored Downtime Eliminated

With the old meter no longer reporting flow, this full replacement brought the system back to life. Installation completed in one visit to minimize disruption.

From Failure to Flowing in a Single Day

From Failure to Flowing in a Single Day

The Lake Lillian water system was running blind. After diagnosing the failure, we installed a new magnetic flow meter and transmitter to get things moving again.

All-New Flow System Installed

All-New Flow System Installed

A complete overhaul of the flow meter system for Lake Lillian. From sensor wiring to transmitter configuration, every detail was handled to ensure lasting performance.

Reliable Readings Start Here

Reliable Readings Start Here

Final touches on a new flow meter installation for the City of Lake Lillian. Accurate daily flow totals are now back online—just in time for the week’s reporting.

Chlorine Line Replacement Done Right

Chlorine Line Replacement Done Right

Swapping out a failed 2-inch chlorine flow meter sensor and transmitter. With no shutoff valve nearby, we waited for the overhead line to drain before proceeding—safety and precision at every step.

Calibrated and Confirmed Before Departure

Calibrated and Confirmed Before Departure

Before wrapping up the job, we performed a full calibration on the newly installed chlorine flow meter. Accurate readings were verified across the flow range—ensuring the system was dialed in and ready for operation.

Safety First in Chlorine Service

Safety First in Chlorine Service

Our technician dons full PPE while preparing to remove a faulty flow meter on a chlorine line. Extra caution was taken due to chemical exposure risks and a lengthy drain-down process.

Hundreds of Feet No Shutoff Valve

Hundreds of Feet No Shutoff Valve

With hundreds of feet of overhead pipe feeding into the sensor, we waited patiently for the line to fully drain. No shortcuts here—chlorine demands respect and careful handling.

New Sensor Installed After Safe Drain-Down

New Sensor Installed After Safe Drain-Down

After an hour-long pipe drain, the new chlorine-compatible flow sensor was installed and torqued to spec. We followed with fresh wiring and a clean transmitter setup.

Precision Matters with Chlorine Flow

Precision Matters with Chlorine Flow

This new 2-inch flow meter now measures chlorine flow with precision. Final calibration ensures safe, accurate readings—critical in chemical dosing applications.

Out with the Old Safe with the New

Out with the Old Safe with the New

The old sensor had stopped reading entirely. We installed a new flow meter and transmitter, taking extra precautions to handle residual chlorine and prevent exposure during the swap.

PPE On Chlorine Flow Restored

PPE On Chlorine Flow Restored

Chlorine flow meters require extra care. Our technician remained fully suited in PPE while removing the failed unit and wiring the new system—safety and compliance always come first.

No Valve No Problem

No Valve No Problem

Despite the lack of a nearby shutoff, we safely drained the system, installed the new flow meter, and completed a full calibration. Chlorine dosing is now back on track and reading accurately.

Flow Restored on a Critical Chlorine Line

Flow Restored on a Critical Chlorine Line

After hours of slow drainage and careful prep, this new 2-inch chlorine flow meter is back in service. Accurate flow data is essential for safe chemical dosing—and now it's fully restored.

From Shutdown to Startup with Care

From Shutdown to Startup with Care

With no isolation valve in sight, draining the chlorine line took time. Once complete, we safely installed the new flow meter, wired the transmitter, and verified proper function through calibration.

Our Goal

To be more than a service provider, we're here to be part of your team. Like a trusted member of the family, we care deeply about your operation and take pride in looking after your instrumentation as if it were our own. You might not have a full-time instrumentation manager on staff, but with us, it’ll feel like you do. We’re here to help you stay ahead, stay compliant, and stay confident.

Get a Quote

Curious about pricing? Get a quote today.

Are your instrument measurements accurate? Get an NIST traceable instrument calibration to certify your device.

NIST Traceable Calibrations

Full Range of Brands & Manufacturers

Online Calibration Certificates

On-site Calibrations

Expedited Calibration Services Available

Brand/Manufacturer Specific Calibration

Questions? Call us at 763-972-1001.

instrument calibration

Permitted & Accredited by Minnesota Commerce Department Weights & Measures

instrument calibration

NIST Handbook 44 Compliant